RediBreeze Installation

The RediBreeze™ Easy 3 Step - NO TOOL - Installation. see below for printable instructions

Unscrew your aerator at the tip of the sink faucet by twisting to the RIGHT (as you look down from above) clockwise.
You "may" need pliers and a cloth to remove your old aerator, but try with your hands first.
Clean the aerator faucet threads with a cloth.

Remove bubble pack from box, place enclosed items on sink in this order.

Step 1: Replace your aerator with provided adapter. Screw into place by twisting to the (LEFT) counterclockwise and tighten using your hand. You do not need tools to install the new adapter.
Step 2: Attach the RediBreeze to the addaptor, by turning (LEFT) counterclockwise. You do not need tools to install the new adapter. Point tip connector into open sink drain and SLOWLY turn on faucet. Check water flow; it should flow normally, without leakage. Turn off the faucet.
Step 3: Attach "colored tip" by placing the end with the black ring all the way into the open end of the connector. Twist gently until it clicks into place.
Step 4: Place tip in mouth and hold head over sink as if brushing teeth. Very slowly, turn on your "sink faucet" until desired amount of pressure is attained. Now push the 'selection switch" (lever) to the rear to activate flow. Begin Breezing.... enjoy.
	When your finished Breezing, turn the lever off, turn the sink faucet off, and detach the Tip (if desired) Place Tip and hose in the handy holder (included).